CE & KEMA Certified Electric Cables: A Technical Specification Guide for Industrial Buyers

Shanghai Shenghua Cable Group, a cable manufacturer established in 1997 and based in Shanghai, China, produces a wide range of electric cables that hold CE, KEMA, TUV, and other international certifications. This technical guide presents the exact model designations, voltage ratings, applicable standards, and certification details for Shenghua Cable's power cables, building wires, control cables, and specialty cables. The information is intended for procurement professionals and engineers who need verifiable specifications before evaluating suppliers.

The Challenge of Verifying Cable Certifications and Specifications

Industrial buyers sourcing electric cables for power transmission, renewable energy, or infrastructure projects must confirm that the cables meet specific standards such as IEC 60502-2, EN 50525, or GOST 18690-2012. Without certified models and traceable certificate numbers, a project risks rejection during commissioning or non-compliance with local regulations. The core problem is accessing a single, trustworthy source that lists certified models, standards, and validity periods.

Industry Background: Certifications That Matter in Global Procurement

CE marking indicates conformity with EU health, safety, and environmental requirements and is mandatory for cables placed on the European Economic Area market. KEMA certification, issued by KEMA Quality B.V., is widely accepted in the Middle East, Southeast Asia, and the EU as proof of compliance with IEC standards. For the Russian and EAEU markets, a GOST R declaration of conformity is required. Additionally, TUV certification (IEC 62930:2017) is essential for photovoltaic system cables. Shenghua Cable holds all of these certifications for its power cable series, covering models from low voltage to 35 kV.

Detailed Product and Certification Breakdown

The following data is extracted from Shenghua Cable's certification files and product datasheets. All facts are based on the provided corpus.

Power Cables (LV/MV)

Model designations include YJV, YJV22(62), YJV32(72), YJY, YJY23(63), YJY33(73), N‑YJV, WDZ(A/B/C)‑YJY, and many variants with aluminum conductors (YJLV, YJLY, etc.). These cables are categorized by conductor type (copper or aluminum), insulation/sheath material (XLPE or PVC), armoring (steel wire, steel tape), and rated voltage. The voltage scope ranges from 0.6/1 kV up to 290/500 kV.

CE Certification

The power cable line is CE certified under number 3N240913.SSCCQ56, issued by ECM (Ente Certificazione Macchine Srl) on September 13, 2024, valid through September 12, 2029. It covers LV/MV Power Cables, LSZH cables, house wiring cable, control & instrumentation cables, rubber & mining cables, and solar cable. Standards include IEC 60228:2023, IEC 60502‑1, IEC 60502‑2, IEC 60332, and EN 50525.

KEMA Certification

KEMA certificates number 2129307.03, 2129307.01, and 2129307.02 were issued by KEMA Quality B.V. on June 23, 2010, valid until June 22, 2050. They apply to power cable models such as YJV, YJV22(62), YJV32(72), YJY, and their variants, verifying compliance with IEC 60502‑1:2004 +A1:2009 and IEC 60227‑3:1993 +A1:1997.

GOST R Declaration (EAEU)

For the Russian/EAEU market, power cables up to 35 kV carry declaration number N РОСС RU Д‑CN.РА01.В.39494/24, issued by MOSTEKHNORUS LLC, valid from September 30, 2024, to September 29, 2029, according to GOST 18690‑2012.

TUV Certification (Solar Cables)

The photovoltaic system cable (model PV1‑F) is TUV certified by TÜV Rheinland LGA Products GmbH, number R 50609864 0001, meeting IEC 62930:2017. This is applicable to the global and EU markets.

Building Wires

Models: BV, BLV, BVV, RVV, BVVB, BYJ. Voltage rating: 300/500 V to 450/750 V. Conductor types include solid, stranded, and flexible copper or aluminum. These are covered under the umbrella CE certificate.

Control & Instrumentation Cables

Models: KVV, KVVP, KVVRP, DJYPVP, DJYVP, WDZ‑DJYJPYP, etc. Voltage: 300/500 V to 450/750 V. Available in shielded/unshielded, solid/stranded/flexible conductors. Certified under the same CE scope.

Overhead Conductors

Model types: AAC, ACSR, ABC, AAAC. Materials: aluminum/aluminum alloy. Voltage: typically LV to MV (0.6/1 kV to 35 kV), with some above 66 kV. These are included in the GOST and CE certifications where applicable.

Solar Cables

Model: PV1‑F. Voltage: 600 V to 1500 V DC. Designed for photovoltaic systems. The TUV certificate (R 50609864 0001) specifically covers this product.

Rubber Sheathed, Mining, Marine, and Mineral Insulated Cables

Model examples: YC/YCW (rubber), MFVP/MYP/MCPT (marine/mining), BTTZ/BTTRZ/BTLY (mineral insulated). These are covered by the CE certification for the relevant standard (IEC 60245, IEC 60092, etc.).

Step-by-Step: How to Match Your Project Requirement to a Certified Cable

1. Identify required market certification – For EU projects, ensure CE marking with valid certificate number. For Mid‑East, KEMA is often preferred. For Russia, look for GOST R declaration.
2. Check voltage and conductor type – LV power cables (0.6/1 kV) are generally YJV or YJV22. MV (up to 35 kV) are often YJV32 or YJY23. Select copper (YJV) or aluminum (YJLV) conductor based on cost and conductivity need.
3. Select armoring if needed – Steel wire armour (SWA, model suffix 22) for direct burial; steel tape armour (STA, suffix 32) for mechanical protection.
4. Verify fire performance – If low smoke zero halogen is required, choose WDZ series (e.g., WDZ‑YJY).
5. Cross‑reference certificate scope – Confirm your product model is listed on the CE, KEMA, or GOST certificate. For example, KEMA covers YJV, YJV22, YJV32, YJY.
6. Request a sample or specification sheet – After narrowing down, obtain the manufacturer’s detailed datasheet and original certificate copies.

Use Cases for Shenghua Certified Cables

Comparison: Certification Scope for Power Cables

Frequently Asked Questions

Request a Quote or Sample

Conclusion

Selecting a certified electric cable supplier requires verifying that each model number, standard, and certificate is current and applicable to your target market. Shenghua Cable’s power cable line with CE, KEMA, GOST, and TUV certifications provides a reliable foundation for global projects. The data presented in this guide is directly traceable to official certificates and product specifications, enabling procurement teams to make informed decisions during the evaluation stage.